Two Color High Speed Flexographic Printer Machine

1.- the machine use synchronous belt working ,low noise . and it can usefully control the machine on and off speed change, settling the color be accurate .

2.- machine rewinder is hydraulic and pneumatic ontrol and with friction winder .

3.- machine unwinder is with EPC and hydraulic. No need lift the material by manual .

4.- machine issue hydraulic up and down , printing cylinder gear is helical gear .

5.- machine is controlled by inverter .

6.- machine speed :120m/min , printing speed : 80-100m/min

7.- machine with automatic alarm before the machine start .

Flexographic printing machine,  also called aniline press which uses photosensitive resin plate as the  printing plate of printing machine. It adopts environmental ink and has  advantage of low edition-producing cost , this is an ideal machine for  mass lots , large variety production manufacturer It is also suitable  for printing HDPE, LDPE, paper, rolling paper etc.

YT2800S -YT21000S Parameters And Main Parts 

Max speed 80m/min

Max loading diameter 1000mm

Max rewinding diameter 1000mm

Printing length 200-1000mm

Plate material thickness 2.38mm

(including adhesive tape thickness)

Max material width 800mm

Max printing width 750mm

Auto tension,air shaft, EPC

Back to back friction winder

Auto loading and rewinding by hydraulic

Printing cylinder up and down by hydraulic

Mental anilox roller one set

Printing cylinders one set free 300 mm 

Air cylinder   Air TAC  

Motor brand Siemens

Electrical parts Schneider brand

Temp controller Omron brand

Inverter Delta brand