Model: YT4800S -YT41000S
1.- the machine use synchronous belt working ,low noise . and it can usefully control the machine on and off speed change, settling the color be accurate .
2.- machine rewinder is hydraulic and pneumatic ontrol and with friction winder .
3.- machine unwinder is with EPC and hydraulic. No need lift the material by manual .
4.- machine issue hydraulic up and down , printing cylinder gear is helical gear .
5.- machine is controlled by inverter .
6.- machine speed :120m/min , printing speed : 80-100m/min
7.- machine with automatic alarm before the machine start .
YT-4800S PARAMETERS AND MAIN PARTS
Max speed 80m/min
Max loading diameter 1000mm
Max rewinding diameter 1000mm
Printing length 200-1000mm
Plate material thickness 2.38mm
(including adhesive tape thickness)
Max material width 800mm
Max printing width 750mm
Auto tension,air shaft, EPC
Back to back friction winder
Auto loading and rewinding by hydraulic
Printing cylinder up and down by hydraulic
Mental anilox roller one set
Printing cylinders one set free 300 mm
Air cylinder Air TAC
Motor brand Siemens
Electrical parts Schneider brand
Temp controller Omron brand
Inverter Delta brand
E-CATALOGUE, PRODUCTS PROMOTION AND NEW